PLANET Broadband Router Firmware Release
----------------------------------------
Router Supported:       ADN-4101
Release Date:           2012/10/24
New Release Version:    1.8
Previous Version:       1.6a

Added Features and Firmware Changes:
1. Add SIP function.
2. Change WiFi DTIM from 100 to 1.
3. Fix DDNS not update after router reboot.
4. Add +4:30 of time zone.
5. Fix can't connect to web via internet when change router's IP
6. Add Planet DDNS function.
=======================================
Router Supported:       ADN-4101
Release Date:           2012/7/9
New Release Version:    1.6a
Previous Version:       1.6

Added Features and Firmware Changes:
1. Fix issue with previous setting will be loss after router reboot.

========================================
Router Supported:       ADN-4101
Release Date:           2012/5/21
New Release Version:    1.6
Previous Version:       1.6

Added Features and Firmware Changes:
===================================
Please following below procedure to fix press any link back to log in page issue

Step1, Please change system time of PC to 2012/5/14.

Step2, PC connects to LAN of ADN-4101.

Step3, fill in user name and password to access to ADN-4101 

Step4, go to Management->firmware Update to update F/W as attached

Step5, when update procedure finish, change system time of PC to current time
===================================
Router Supported:       ADN-4101
Release Date:           2011/11/2
New Release Version:    1.6
Previous Version:       1.5

Added Features and Firmware Changes:
====================================
1.Fix in WDS mode,change the wireless configuration then the device crash issue.
2.Modified the SNMP OID detection direction. 
3.Remove PPTP dial-in feature for system reliability.
4.Add the PPPoA connection throughput. 

Previous Release History:
=========================
Version 1.5
1. Initial release version

Upgrade Method:
===============
1) To upgrade the ADN-4101, please login machine and click on the "Management" menu on the top.
2) In "Management" menu, choose "Firmware Update".
3) In this page, please use the "Browse" button to allocate the firmware file from your local disk.
4) Once the new firmware file is selected, click "Update Firmware" button to start the upgrade process.
5) After the process above, the system is going to update the software, please wait for a minute unit the system rebooting.


Note:
=====
Do not turn the power off during the upgrade process. This will damage the unit.
This firmware is for ADN-4101 only, and please reset the device to the factory default setting after the upgrading.



Thanks for choosing PLANET products, any comment or feedback will be appreciated.

Best Regards,
PLANET Tech Support Team
support@planet.com.tw