The WGSW-24040HP series is the latest generation of PLANET Managed Gigabit PoE Switches featuring PLANET intelligent PoE functions to improve the availability of critical business applications. The series provides IPv6/IPv4 management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000BASE-T ports featuring 30-watt 802.3at Power over Ethernet plus (PoE+) and 4 Gigabit SFP slots. With total power budget up to 220W and 440W for different kinds of PoE applications, the series provides quick, safe and cost-effective Power over Ethernet network solutions to security IP surveillance for small businesses and enterprises.
Centralized Power Management for Gigabit Ethernet PoE Networking
To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the WGSW-24040HP series features IEEE 802.3at PoE+ that combines up to 30 watts of power output and data per port over one CAT 5E/6 Ethernet cable. It is designed specifically to meet the demand of higher power consuming network PD (powered devices) such as IR, PTZ, speed dome cameras or even box type IP cameras with built-in fan and heater. Compliant with both 802.3at and 802.3af, the WGSW-24040HP series allows more flexibility in power requirement for a variety of PDs.
Built-in Unique PoE Functions for Powered Devices Management
As a managed PoE Switch for surveillance, wireless access and VoIP network, the WGSW-24040HP series features special PoE Management functions:
■ PD Alive Check
■ Scheduled Power Recycling
■ SMTP/SNMP Trap Event Alert
■ PoE Schedule
Intelligent Powered Device Alive-Check
The WGSW-24040HP series can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSW-24040HP series will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.
Scheduled Power Recycling
The WGSW-24040HP series allows each of the connected PoE IP cameras to reboot in a specific time each week. Therefore, it will reduce the chance of IP camera crash resulting from buffer overflow.
SMTP/SNMP Trap Event Alert
Though most NVR or camera management softwares offer SMTP email alert function, the WGSW-24040HP series further provides event alert function to help to diagnose the abnormal device owing to the network connection break, lost of PoE power or the rebooting response by PD Alice Check process.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection, the WGSW-24040HP series can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save power and money.
Cost-effective IPv6 Managed Gigabit Switch Solution for SMBs
Faced with the increasingly large number of IP cameras and wireless APs being installed and deployed in all kinds of applications, more and more network equipment start to support IPv6 protocol for next generation networking. To fulfill the IPv6 management demand, the WGSW-24040HP series works with the original IPv4 network structure, and also supports the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the WGSW-24040HP series is the best choice for SMBs, and IP surveillance and wireless service providers to connect with IPv6 network.
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
To help customers stay on top of their businesses, the WGSW-24040HP series not only provides ultra high transmission performance and excellent layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly secured, flexible management and simpler networking application.
For efficient management, the WGSW-24040HP managed switch series is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the WGSW-24040HP series offers an easy-to-use, platform independent management and configuration facility. The WGSW-24040HP series supports SNMP and it can be managed via any standard SNMP v1 and v2 management software. For the text-based management mode, the WGSW-24040HP can be accessed via Telnet and the console port. Moreover, the WGSW-24040HP series offers remote secure management by supporting SSH, SSL and SNMPv3 connection whose packet content can be encrypted at each session.
Robust Layer 2 Features
The WGSW-24040HP series can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD snooping. The WGSW-24040HP series provides 802.1Q tagged VLAN and the VLAN groups allowed will be maximally up to 255. The WGSW-24040HP not only allows the operation of a high-speed trunk combining multiple ports, but also supports connection fail-over.
The WGSW-24040HP series offers a comprehensive Layer 2 to Layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict to network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The WGSW-24040HP series also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now construct highly secured corporate networks with considerably less time and effort than before.
Flexible and Extendable Solution
The four mini-GBIC slots built in the WGSW-24040HP series support dual speed, and 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and above 10/20/30/40/50/70/120 km (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for IP PoE Camera and NVR System
The WGSW-24040HP series brings an ideal secure surveillance system at a lower total cost. It provides 24 10/100/1000Mbps 802.3at PoE ports with 4 Gigabit TP/SFP Combo interfaces, offering sufficient PoE power for a maximum of 24 IEEE 802.3af PoE IP cameras at the same time.
With 4 Gigabit TP/SFP Combo interfaces, the WGSW-24040HP series supports connection to three 8-channel NVR systems to receive stream from 20 IP cameras and also to backbone switch from an uplink port, and then access to control center. With its high performance switch architecture, the recorded video files from the 20 IEEE 802.3af PoE IP cameras can be saved in the NVR systems, which can be controlled and monitored both in the local LAN and the remote site via Internet.
IP Office Department/Workgroup PoE Switch
As the business expands, the additional telephones required could be installed at less cost via the implementation of PoE IP telephony system than that of the traditional circuit wiring telephony system. The WGSW-24040HP series helps enterprises to efficiently create an integrated data, voice, and powered VoIP network. PLANET IEEE 802.3af compliant IP phones can be installed without any power cable because it can be powered via the standard Ethernet cable from the connected WGSW-24040HP series. With the WGSW-24040HP series, IP telephony deployment becomes more reliable and cost effective, which helps enterprises save tremendous cost when upgrading from the traditional telephony system to IP telephony communications infrastructure.
IP Office Backbone PoE Switch
Providing up to 24 PoE, in-line power interfaces, or up to 20 PoE, in-line power interfaces and 4 Gigabit TP/SFP combo interfaces, the WGSW-24040HP series can easily build an IP phone system, IP camera system, or wireless AP group for the enterprises in which power can be centrally controlled. For instance, IP cameras or wireless APs can be easily installed in the company for surveillance demands or building a wireless roaming environment in the office. Without the power socket limitation, the WGSW-24040HP series makes the deployment of IP cameras or wireless LAN AP easier and more efficient. The 4 Gigabit TP/SFP combo interfaces in the WGSW-24040HP series also offers flexible Gigabit TP or fiber connection for uplink to public server groups.
|Copper Ports||24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports|
|10/100/1000Mbps/SFP Combo Interfaces||4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP (Mini-GBIC) supports 100/1000Mbps dual mode DDM, shared with Port-21 to Port-24|
|Console||1 x RS232 DB9 serial port (115200, 8, N, 1)|
|Address Table||8K entries, automatic source address learning and ageing|
|Share Data Buffer||4 megabits|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Jumbo Frame||9K bytes|
|Reset Button||< 5 sec: system reboot
> 5 sec: factory Default
Fan 1 (Green), Fan 2 (Green), PWR (Green)
Fan 1 (Green), Fan 2 (Green), Fan 3 (Green), PWR (Green)
PoE Ethernet Interfaces (Port 1 to Port 24):
LNK/ACT (10/100/1000Mbps, Green), PoE-in-Use (Orange)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000 (LNK/ACT, Green), 100 (LNK/ACT, Orange)
|Power Requirements||WGSW-24040HP: 100~240V AC, 50/60Hz, 4A
WGSW-24040HP4: 100~240V AC, 50/60Hz, 6A
|Power Consumption (Full Load)||WGSW-24040HP: 262 watts
WGSW-24040HP4: 482 watts
|ESD Protection||6KV DC|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at/802.3af Power over Ethernet/PS0045|
|PoE Power Supply Type||End-span|
|PoE Power Output||Per port 56V DC, 590mA. max. 30.8 watts|
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Budget||WGSW-24040HP: 220 watts max.
WGSW-24040HP4: 440 watts max.
PD @ 7 watts: 24 units
PD @ 15.4 watts: 14 units
PD @ 30.8 watts: 7 units
PD @ 7 watts: 24 units
PD @ 15.4 watts: 24 units
PD @ 30.8 watts: 14 units
|Layer 2 Functions|
|Port Configuration||Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
|Port Status||Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status|
|VLAN||802.1Q tagged based VLAN
Private VLAN Edge (PVE)
IP Subnet-based VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
|Link Aggregation||IEEE 802.3ad LACP/static trunk
12 groups of 8-port trunk supported
|Spanning Tree Protocol||STP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
|QoS||Traffic classification based, strict priority and WRR
8-level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/ToS field in IP packet
|IGMP Snooping||IGMP (v1/v2/v3) snooping, up to 255 multicast groups
IGMP querier mode support
|MLD Snooping||MLD (v1/v2) snooping, up to 255 multicast groups
MLD querier mode support
|Access Control List||IP-based ACL/MAC-based ACL
Up to 256 entries
|Bandwidth Control||Per port bandwidth control
|Layer 3 Functions|
|IP Interfaces||Max. 8 VLAN interfaces|
|Routing Table||Max. 32 routing entries|
|Routing Protocols||IPv4 software static routing
IPv6 software static routing
|Basic Management Interfaces||Console/Telnet/Web browser/SNMP v1, v2c|
|Secure Management Interfaces||SSH, SSL, SNMP v3|
|SNMP MIBs||RFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
|Regulation Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet PLUS
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree protocol
IEEE 802.1w Rapid Spanning Tree protocol
IEEE 802.1s Multiple Spanning Tree protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
FRC 3810 MLD version 2
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 20 ~ 95% (non-condensing)
|Storage||Temperature: -20 ~ 70 degrees C
Relative Humidity: 20 ~ 95% (non-condensing)
|2017-02-10||1.0||WGSW-24040HP / WGSW-24040HP4|
|2018-01-05||1.342c171214||Improved System Stability.|
|2017-09-29||1.342c170918||1. Fixed IGMP control packet that caused the Switch CPU to have 100% loading
2. NTP function improved
3. Monitoring SFP Transceiver DDM information from CLI
|2014-12-31||1.342c141223||Functions Added -
1. IPv4/IPv6 software Static Routing
2. Cisco-like command and CDP aware
3. PoE sequential power up
|2015-08-14||1.1||1.Supporting static VLAN routing.
2.This user's manual is for firmware version 1.342c141223 or later.
|MGB-Series Transceiver||1000BASE-SX/LX SFP Transceiver|
|MFB-Series Transceiver||100BASE-FX SFP Transceiver|
|POE-162S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|POE-E101||IEEE 802.3af Power over Ethernet Extender|
|POE-E201||IEEE 802.3at Power over Gigabit Ethernet Extender|
|24-Port 10/100/1000Mbps 802.3at PoE + 4-slot Shared SFP Managed Switch (220 watts)|
|24-Port 10/100/1000Mbps 802.3at PoE + 4-slot Shared SFP Managed Switch (440 watts)|