Compact Size for More Practicability and Convenience
PLANET IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-negotiation ports, IP30-rated rugged but compact case and a wide-ranging redundant power system (12~48V DC or 24V AC). The IGS-500T is able to operate in any harsh environment with operating temperature ranging from -40 to 75 degrees C.
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission.
Low Power Consumption for Green Networking
The IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving methods. These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
Dual Power Input for High Availability Network System
The IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.
High Switch Performance
The IGS-500T offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the IGS-500T to provide fast and reliable data transfer.
Plug and Play
All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Designed for Heavy Industries
The IGS-500T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.
|Copper Ports||5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation|
|Connector||Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
|Alarm||Provides one relay output for power failure
Alarm relay current carry ability: 1A@DC 24V
|LED||3 x LED for system and power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Red: Power Fault
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT
|Power Requirements||12~48V DC, redundant power with polarity reverse protection function, 24V AC power support|
|Power Consumption / Dissipation||3.6 watts/12.35BTU|
|Installation||DIN-rail kit and wall-mount ear|
|Enclosure||IP30 metal case|
|Dimensions (W x D x H)||70 x 104 x 30 mm|
|Switch Processing Scheme||Store-and-Forward|
|Address Table||4K entries|
|Buffer Memory||1M bits on-chip buffer memory|
|Flow Control||Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
|Throughput (packet per second)||7.4Mpps@64bytes|
Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters)
|Standards Compliance||IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Stability Testing||IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|Temperature||Operating: -40~75 degrees C
Storage: -40~75 degrees C
|Humidity||Operating: 5~90%, Storage: 5~90% (non-condensing)|
|IGS-501T||5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)|
|IGS-801T||8-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)|
|IGS-1020TF||Industrial 8-Port 10/100/1000T + 2 1000X SFP Ethernet Switch (-40~75 degrees C)|
|ISW-800T||Industrial 8-Port 10/100TX Compact Ethernet Switch|
|ISW-501T||5-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature)|
|ISW-801T||8-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature)|
|IGS-500T||Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch (-40~75 degrees C operating temperature)|