Cost-optimized, Configure-free Gigabit PoE+ Switch for System Integrators
PLANET GSW-2620HP, an ideal Gigabit PoE Switch, provides a cost-effective advantage to local area networks of SMBs. Offering Layer 2 data packet switching and stable operation, this model also complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price. The GSW-2620HP is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 2 1000BASE-X SFP interfaces with inner power system. Its 24 Gigabit Ethernet ports are integrated with an 802.3at PoE+ injector function. It offers a rack-mountable, safe and reliable power solution for SMBs deploying Power over Ethernet networks.
IEEE 802.3at PoE+ Compliant Power Source Switch
The PoE in-line power following the IEEE 802.3at/af standard makes the GSW-2620HP able to deliver Gigabit speed data and up to 30 watts of power per port to 24 PoE compliant powered devices (PDs) with a combined power output budget of up to 220 watts. The GSW-2620HP provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.
Ethernet Data Transmit Distance Extension
The built-in solid DIP switch provides “Standard”, “VLAN” and “Extend” operation modes. The GSW-2620HP operates as a normal IEEE 802.3at PoE+ switch in the “Standard” operation mode.
The “VLAN” operation mode features with port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
In the “Extend” operation mode, the GSW-2620HP operates on a per-port basis at 10Mbps duplex operation but supports 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the GSW-2620HP provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation.
The GSW-2620HP uses new engine that incorporates two advanced Green Networking technologies:
The Idle Mode Link Down power saving of the GSW-2620HP complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent use of power feature actively determines the appropriate power level based on the cable length. When connecting to the GSW-2620HP with Ethernet cable shorter than 20m, a device can obtain maximum power savings because the GSW-2620HP would automatically detect the Ethernet cable length and reduce power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy savings.
Easy Installation and Cable Connection
Providing data transfer and high PoE in one unit, the GSW-2620HP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the GSW-2620HP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Flexible Extension Solution
The two mini-GBIC slots built in the GSW-2620HP are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfect Integration Solution for PoE IP Surveillance
The GSW-2620HP brings an ideal, secure surveillance system at a lower total cost; the GSW-2620HP provides 24 10/100/1000Mbps 802.3at PoE ports able to feed sufficient PoE power for 24 IEEE 802.3af/7 IEEE 802.3at PoE IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVR systems, uplinked to the backbone switch and the monitoring center. With such high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved in the NVR system to enable the administrators to control and monitor the surveillance images both in the local LAN and the remote sites.
Department/Workgroup PoE Network
Providing 24 PoE in-line power interfaces, the GSW-2620HP can easily build a power where IP phone system, IP camera system and wireless AP group for enterprises can be centrally controlled. The GSW-2620HP delivers full ports of 802.3af/at compliant Gigabit Ethernet network connectivity with high-performance and cost-effective advantages for the increasing number of PoE IP telephones, PoE IP cameras, PoE wireless access points and other devices applied at the edge of the small or medium enterprise network.
Power over Ethernet
|10/100/1000BASE-T Copper Ports||24 auto-MDI/MDI-X ports|
|802.3af/802.3at PoE+ Injector Port||24|
|1000BASE-X SFP/mini-GBIC Slots||2|
|DIP Switch||Selectable operation mode
|Dimensions (W x D x H)||440 x 208 x 44 mm (1U height)|
|Power Requirements||100~240V AC, 50/60Hz, 5A max.|
|Power Consumption/Dissipation||Max. 275 watts/939 BTU|
|Protection||6KV surge protection
8KV ESD protection
10/100/1000T RJ45 Interfaces
1000 LNK / ACT (Green), 10/100 LNK/ACT (Amber), PoE (Amber)
1000X SFP Interfaces
1000 LNK / ACT (Green)
|MAC Address Table||8K entries|
|Jumbo Frame||9216 bytes|
|Flow Control||IEEE 802.3x pause frame for full duplex; back pressure for half duplex|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at Power over Ethernet Plus/PSE
Backward compatible with IEEE 802.3af Power over Ethernet
|PoE Power Supply Type||End-span: 1/2 (+), 3/6 (-)|
|PoE Power Output||Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
|PoE Power Budget||240 watts|
|Number of PDs, 7 watts||24|
|Number of PDs, 15.4 watts||15|
|Number of PDs, 30 watts||8|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy-Efficient Ethernet
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|2020-04-24||3.0||Initial Release for hardware version 3.0.|
|ICA-HM620||2 Mega-pixel PoE Plus Speed Dome Internet Camera|
|WBS-502N||5GHz 802.11n 300Mbps Outdoor Wireless CPE|
|WDAP-8350||600Mbps Dual Band 802.11n Outdoor Wireless CPE (IP66, 802.3at PoE, 4 x N-Type connector)|
|VIP-1120PT||High Definition Color PoE IP Phone|
|VIP-2140PT||High Definition Color PoE IP Phone with Dual Display|
|VTS-700P||7-inch SIP Indoor Touch Screen PoE Video Intercom|
|HDP-5240PT||720p SIP Multi-unit Video Door Phone with RFID and PoE|
|HDP-5260PT||720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID and PoE|
|POE-161S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|POE-162S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|IPOE-162S||Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter|
|POE-E201||IEEE 802.3at Power over Gigabit Ethernet Extender|
|POE-E202||1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender|
|LRP-101C-KIT||1-Port Long Reach PoE over coax Extender Kit (LRP-101CH + LRP-101CE)|
|LRP-101U-KIT||1-Port Long Reach PoE over UTP Extender Kit (LRP-101UH + LRP-101UE)|
|24-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Gigabit Ethernet Switch|