A Perfect Full PoE+ Power Solution Ideal for Hardened Environment
With Plug and Play design, PLANET ISW-514PTF Industrial-grade, DIN-rail type Unmanaged Fast Ethernet PoE+ Switch, featuring four IEEE 802.3at PoE+ 10/100BASE-TX ports and 1 additional 100BASE-FX fiber optic interface for uplink connection, allows to automatically detect and configure internal and external peripherals.
The ISW-514PTF is designed with redundant power system and is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 120 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP40 metal housing.
Convenient and Reliable Power System
To facilitate the 802.3at PoE+ usage with the commonly-used 12~54V DC power input for transportation and industrial-level applications, the ISW-514PTF adopts 12~54V DC to 54V DC power boost technology to solve power source issue but does not require special power supplies. Its wide-ranging voltages design is suitable for worldwide operability with high availability applications requiring dual or backup power inputs.
802.3at PoE+ Power and Ethernet Data Transmission Extension
The ISW-514PTF has a built-in solid DIP switch providing “Standard”, "VLAN" and “Extend” operation modes. By default, the ISW-514PTF operates as a normal IEEE 802.3af/at PoE+ Switch in the “Standard” operation mode.
The "VLAN" operation mode features with port-based VLAN function helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.
In the “Extend” operation mode, the ISW-514PTF operates on a per-port basis at 10Mbps full duplex operation and can support 25-watt PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.
Fiber Optic Link Capability for Flexible Distance Extension
The ISW-514PTF is equipped with one 100BASE-FX port, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 2 kilometers (multi-mode fiber) to 20/40/60/120 kilometers (single-mode fiber or WDM fiber). They are suitable for transportation, manufacturing, security and surveillance for long-distance extension without any limitation.
With the IP40 metal industrial case, the ISW-514PTF provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-514PTF can be placed in almost any difficult environment.
The ISW-514PTF provides contact discharge of ±5KV DC and air discharge of ±5KV DC for Ethernet ESD protection. It also supports ±5KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
Intelligent LED Indicator for Real-time PoE Usage
The ISW-514PTF helps users to monitor the current status of PoE power usage easily and efficiently by its advanced LED indication. Called “PoE Power Usage”, the front panel of the Industrial Gigabit PoE+ Switch has four orange LEDs indicating 30W, 60W, 90W and 120W of PoE power usage.
Flexible and Easy Installation with Limited Space
The ISW-514PTF is designed to be installed in different environments, such as wall enclosure. It can be installed by fixed wall mounting or DIN rail mounting, thereby making its usability more flexible and easier in any space-limited location.
Industrial-grade PoE+ Switch for Building Automation and Security
Suitable for buildings where security is strictly enforced, the ISW-514PTF, with four Fast Ethernet 802.3at PoE+ in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 4 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the ISW-514PTF makes the installation of IP cameras or wireless APs easier and more efficient.
Perfect Integration Solution for IP PoE Camera and NVR System
The ISW-514PTF provides four 10/100BASE-TX 802.3at PoE+ ports which can offer sufficient PoE power to 4 PoE IP cameras at the same time. In addition, with the 100BASE-FX interfaces, the ISW-514PTF can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the ISW-514PTF facilitates the recorded video files from the 4 PoE+ IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The ISW-514PTF undoubtedly brings an ideal secure surveillance system at a lower total cost.
Power over Ethernet
Industrial Case and Installation
|Four 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Ports 1 to 4)
|PoE Injector Ports
|Four ports with 802.3af/at PoE+ injector function (Ports 1 to 4)
|One port 100BASE-FX SFP port
|Removable 6-pin terminal block
Pin 1/2 for Power 1
Pin 3/4 for power fault alarm
Pin 5/6 for Power 2
|DIP Switch (Ports 1 to 4)
|Standard mode: 30-watt PoE transmission distance of 100m at speed of 10/100Mbps
VLAN mode: "Port-based VLAN Protection" where ports can be isolated from each other via one DIP switch. Only Port-5 can visit other ports.
Extend mode: 25-watt PoE transmission distance of 250m at speed of 10Mbps
|12~54V DC, 7A (max.)
|Max. 7 watts/23.8BTU@54V DC input (System)
Max. 133 watts/453BTU@54V DC input (Ethernet + PoE Full Loading)
|One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
|Dimensions (W x D x H)
|50 x 87 x 135 mm
|IP40 metal case
|3 x LED for System and Power:
Green: DC Power 1
Green: DC Power 2
Red: Power Fault Alarm
2 x LED for PoE +Copper Port (Ports 1 to 4):
Green: LNK/ACT (10/100Mbps)
1 x LED for 100BASE-FX Port (Port 5):
Green: LNK/ACT (100Mbps)
4 x LED for PoE Usage(W) (Low to high):
Amber: 30W, 60W, 90W and 120W
|Throughput (packet per second)
|0.74Mpps @64 bytes
|Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
|Power over Ethernet
|IEEE 802.3at Power over Ethernet Plus/PSE
|PoE Power Supply Type
|Power Pin Assignment
|1/2 (+), 3/6 (-)
|PoE Power Output
|Per port 54V DC, Max. 36 watts
|PoE Power Budget (max.)
|120W maximum @54V DC
90W maximum@24V DC
60W maximum@12V DC
|Max. Number of Class 2 PDs
|Max. Number of Class 3 PDs
|Max. Number of Class 4 PDs
|FCC Part 15 Class A, CE
|IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
|Operating: -40~75 degrees C
Storage: -40~85 degrees C
|Operating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)
|[Release for hardware version 3.0.]
Modify contents of user manual.
|Update pictures and modify description
|Initial release for ISW-514PTF(V3)
|Industrial 5-Port 10/100TX Ethernet Switch with 4-Port 802.3at PoE+
|Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Ethernet Switch
|Industrial IP67 8-Port 10/100TX M12 802.3at PoE+ Switch
|Industrial 8-Port 10/100TX M12 802.3at PoE+ Switch
|Compact Industrial 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T Ethernet Switch (-40~75 degrees C)
|Industrial 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T Gigabit Ethernet Switch
|Industrial 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T + 1-Port 100/1000X SFP Gigabit Ethernet Switch
|Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000/2500X SFP Ethernet Switch
|Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Ethernet Switch
|Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Ethernet Switch w/ 12V Booster
|Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Switch with 4-port PoE+
|Industrial 8-Port 10/100/1000T Wall-mounted Gigabit PoE+ Switch
|Dual Band 802.11ac 1200Mbps Wave 2 Outdoor Wireless AP
|Dual Band 802.11ax 1800Mbps Outdoor Wireless AP
|5GHz 802.11ac 900Mbps TDMA Outdoor Long Range Wireless CPE Kit
|5GHz 802.11ac 900Mbps Outdoor Wireless CPE
|H.265 1080p Smart IR Bullet IP Camera
|H.265+ 4MP Full Color Bullet IP Camera
|H.265+ 4MP Full Color Dome IP Camera
|2 Mega-pixel PoE Plus Speed Dome Internet Camera
|Industrial 4-Port 10/100TX 802.3at PoE+ plus 1-Port 100FX Ethernet Switch
|48V, 240W DIN-rail Power Supply (NDR-480-48, adjustable 48-56V DC Output)
|48V, 480W DIN-rail Power Supply (NDR-480-48, adjustable 48-56V DC Output)