Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of Enterprise, Telecoms and Campuses
PLANET latest Metro series Ethernet switch MGSD-10080F is equipped with advanced management functions and provides 8 100/1000Mbps dual speed SFP Fiber ports, and 2 10/100/1000Mbps TP ports delivered in a rugged strong case. It is capable of providing non-blocking switch fabric and wire-speed throughput as high as 20Gbps in the temperature range from -10 to 60 degrees C without any packet loss and CRC error, which greatly simplify the tasks of upgrading the enterprise LAN for catering to increasing bandwidth demands. The MGSD-10080F is specially designed for service provider to deliver profitable long distance Ethernet network. The MGSD-10080F adopts “Front Access” design, making the wiring and maintenance of the MGSD-10080F placed in a cabinet very easy for technicians.
Flexible and Extendable Solution
The 8 mini-GBIC slots built in the MGSD-10080F support dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The MGSD-10080F supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
AC and DC Redundant Power to Ensure Continuous Operation
To enhance the operation reliability and flexibility, the MGSD-10080F is equipped with one 100 ~ 240V AC power supply unit and two additional 36 ~ 72V DC power input connectors for redundant power supply installation. The Redundant Power Systems are specifically designed to handle the demands of high tech facilities requiring the highest power integrity. Furthermore, with the 36~ 72V DC power supply implemented, the MGSD-10080F can be applied as the telecom level device that could be located in the electronic room.
Digital Input and Digital Output for External Alarm
The MGSD-10080F supports Digital Input, and Digital Output on the front panel. The external alarm offers technicians the ability to use Digital Input to detect, and log external device status (such as door intrusion detector) for the alarm as Digital Output could be used to alarm if the MGSD-10080F has port link down, link up or power failure.
Cost-effective IPv6 Managed Gigabit Switch Solution for Metro Ethernet
To fulfill the demand for ISP to build the IPv6 (Internet Protocol version 6) network infrastructure speedily, the MGSD-10080F supports both IPv4 and IPv6 management functions. It can work with original IPv4 network structure and also support the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the MGSD-10080F Metro Ethernet Switch is the best choice for ISP and service providers to build the IPv6 FTTx edge service and for Industries to connect with IPv6 network.
Layer 2 / Layer 4 Full-functioned Managed Switch for Building Automation Networking
The MGSD-10080F Managed Ethernet Switch is also ideal for applications in the factory data centers and distributions. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and secure management features to protect customer’s Automation Ethernet network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures.
Powerful Security
The MGSD-10080F offers comprehensive Access Control List (ACL) for enforcing security to the edge. Its protection mechanisms also comprise port-based 802.1x and MAC-based user and device authentication. The port-security is effective in limiting the numbers of clients passing through, so that network administrators can now construct highly secured corporate networks with time and effort considerably less than before.
Optimized Design for Metropolitan Area Network
By means of improving the technology of Optical Fiber Ethernet with high-flexible, high-extendable and easy-installation features, the MGSD-10080F offers the data exchange speed of Optical Fiber up to 1Gbps, and the distance of Gigabit Optical Fiber up to 120km. It supports service providers, such as ISP and Telecom, to install Metropolitan Area Network (MAN) based on Fiber technology to the WAN Internet Service.
Excellent Solution of Core / Department Switch
With 10 Gigabit ports, the MGSD-10080F is able to connect up to 10 edge switches in the Ethernet environment. Moreover, the MGSD-10080F provides 20 Gigabit per second switch fabric and high bandwidth for backbone connection. The MGSD-10080F is an excellent choice of core layer switch for a Gigabit network.
Physical Port
Redundant Power System
Digital Input / Digital Output
Hardware Design
Layer 2 Features
Quality of Service
Multicast
Security
Management
Hardware Specification | |||||
---|---|---|---|---|---|
SFP/mini-GBIC Slots | 8 1000Base-SX/LX/BX SFP interfaces, from port 1 to port 8 Compatible with 100Base-FX SFP |
||||
Copper Ports | 2 10/ 100/1000Base-T RJ-45 auto-MDI/MDI-X ports | ||||
Console Port | 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1) | ||||
Switch Architecture | Store-and-Forward | ||||
Throughput (packet per second) | 14.8Mpps @ 64Bytes packet | ||||
Switch Fabric | 20Gbps / non-blocking | ||||
Address Table | 8K entries, automatic source address learning and ageing | ||||
Share Data Buffer | 4Mbits | ||||
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
||||
Jumbo Frame | 9Kbytes | ||||
Reset Button | < 5 seconds: System Reboot > 10 seconds: Factory Default |
||||
Dimensions (W x D x H) | 330 x 155 x 43.5 mm, 1U high | ||||
Weight | 1661g | ||||
LED Indicator | System: PWR (Green) DC 1 (Green) DC 2 (Green) Fault Alarm (Green) Ring* (Green) Ring Owner* (Green) Per Gigabit Ports: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) |
||||
Power Consumption | Max. 11.2 Watts / 38.2 BTU (AC input) Max. 10.8 Watts / 36.9 BTU (DC input) |
||||
Power Requirements | AC 100~240V, 50/60Hz 0.15A -36V DC @ 0.3A, Range: -36V ~ -72V DC |
||||
Alarm | One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V |
||||
DI/DO | 2 Digital Input (DI) Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24VDC, 100mA max. |
||||
Layer 2 Function | |||||
Port Configuration | Port disable / enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable Bandwidth control on each port Power saving mode control |
||||
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
||||
Port Mirroring | TX / RX / Both 1 to 1 monitor |
||||
VLAN | 802.1Q Tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs |
||||
Link Aggregation | IEEE 802.3ad LACP / Static Trunk Supports 5 groups of 8-Port trunk support |
||||
QoS | Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP Packet |
||||
IGMP Snooping | IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Querier mode support |
||||
MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Querier mode support |
||||
Access Control List | IP-based ACL / MAC-based ACL Up to 123 entries |
||||
Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
||||
Management | |||||
Basic Management Interfaces | Console, Telnet, Web Browser, SNMP v1, v2c and v3 | ||||
Secure Management Interface | SSH, SSL, SNMP v3 | ||||
SNMP MIBs | RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC-3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB |
||||
Standards Conformance | |||||
Regulation Compliance | FCC Part 15 Class A, CE | ||||
Standards Compliance | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid Spanning tree protocol IEEE 802.1s Multiple Spanning tree protocol IEEE 802.1p Class of service IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 |
||||
Environment | |||||
Operating |
|
||||
Storage |
|
Date | Version | Description | Download |
---|---|---|---|
2013-04-19 | 1.0 | MGSD-10080F |
![]() |
Date | Version | Description | Download |
---|---|---|---|
2013-04-08 | 1.0 | Initial release. |
![]() |
Date | Version | Description | Download |
---|---|---|---|
2013-10-18 | 1.1 | Add ERPS. |
![]() |
Date | Version | Description | Download |
---|---|---|---|
2015-05-12 | 1.0 | EC Declaration |
![]() |
Photo | Model | Description |
---|---|---|
![]() |
MGB-Series Transceiver | 1000BASE-SX/LX SFP Transceiver |
![]() |
MFB-Series Transceiver | 100BASE-FX SFP Transceiver |
Ordering Information | |
---|---|
MGSD-10080F |
8-Port 100/1000X SFP + 2-Port 10/100/1000T Managed Metro Ethernet Switch |