High-performance XG(S)-PON / GPON Combo OLT for FTTx Applications
PLANET XGPL-1000 XG(S)-PON / GPON Combo Optical Line Terminal (OLT) consists of one XG(S)-PON / GPON Combo PON port, two Gigabit Ethernet ports, one 10G SFP+ uplink port and one management port. It supports GPON, XG-PON and XGS-PON standards, providing flexible deployment for both existing GPON networks and next-generation 10G PON broadband access networks.
It is easy to install and maintain a PON deployment of up to 128 ONU and HGU devices, providing highly-effective XG(S)-PON / GPON solutions and convenient management for fiber optic broadband networks.
10G PON High-speed and Long-distance Coverage for Triple Play Services
The XGPL-1000 provides high bandwidth of up to 9.953Gbps downstream and 9.953Gbps upstream in XGS-PON mode, while also supporting GPON and XG-PON access technologies. It offers long-distance coverage of up to 20km between equipment nodes and flexibility for network deployment. The XGPL-1000 is a cost-effective and scalable access solution for triple-play service applications such as HDTV, IPTV, voice-over-IP (VoIP), multimedia services and surveillance networks.
High Split Ratio for Cost-effective XG(S)-PON / GPON Deployment
The XGPL-1000 is an ideal solution for FTTx applications. It helps to minimize the investment cost for carriers and service providers by offering a high split ratio of 1:128 per PON port and supporting the usage of PLANET ONUs and HGUs. With support for VLAN, Dynamic Bandwidth Allocation (DBA), Service Level Agreement (SLA) and Access Control List, the XGPL-1000 enables secure, flexible and efficient bandwidth management for multiple end users through a passive optical splitter.
Flexible and Extendable 10Gb Ethernet Solution
The XGPL-1000 has one 10G SFP+ uplink port to deliver ultra-high-speed networking over long distances to service providers. The 10G SFP+ slot supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 10G Ethernet uplink capability and additional 2-port Gigabit Ethernet connectivity, the administrator can flexibly choose suitable SFP/SFP+ transceivers according to the transmission distance or required transmission speed to extend the network efficiently.
Redundant Power Supply Design to Increase Reliability
The XGPL-1000 is equipped with one 100~240V AC power supply unit and reserves another backup power slot on the rear panel. Users can add a second AC or DC power module for redundant power supply installation. The redundant power system is designed to improve power reliability and ensure stable operation for broadband access networks.
Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management
To help customers build secure and flexible broadband networks, the XGPL-1000 not only provides high transmission performance and Layer 2 switching technologies, but also supports IPv4/IPv6 software VLAN routing. This allows traffic to be routed across different VLANs and IP subnets, making network management more secure, flexible and efficient.
Robust Layer 2 Features
The XGPL-1000 can be programmed for basic switch management functions such as port speed configuration, VLAN, Spanning Tree Protocol, WRR, bandwidth control and IGMP/MLD snooping. It also supports 802.1Q tagged VLAN, Q-in-Q, VLAN translation and DSCP-to-CoS mapping. These features provide reliable traffic control and flexible service deployment for FTTx applications.
Efficient and Secure Management
For efficient management, the XGPL-1000 is equipped with console, Web, Telnet, CLI and SNMP management interfaces.
- With the built-in Web-based management interface, the XGPL-1000 offers an easy-to-use, platform-independent management and configuration facility.
- For text-based management, it can be accessed via Telnet and the console port.
- For standard-based monitoring and management software, it supports SNMP management.
Moreover, the XGPL-1000 offers secure remote management by supporting SSHv2 connection, which encrypts the packet content at each session.
Cost-effective 10G PON Access for Triple Play, Surveillance and FTTx Applications
PLANET XGPL-1000 delivers high-speed voice, data and video services to residential and business subscribers through GPON, XG-PON and XGS-PON technologies. With PON technology, the XGPL-1000 offers competitive advantages including long-term fiber infrastructure deployment, lower operating costs from the reduction of active network components, support for up to 20km transmission distance between equipment nodes, easy installation and maintenance, and high-bandwidth access for next-generation broadband services.
Supporting up to 1:128 optical split ratio, the XGPL-1000 allows service providers to connect multiple ONU and HGU devices through a passive optical splitter, making it ideal for FTTH, FTTB, FTTO, SOHO and small business broadband access applications. With up to 9.953Gbps downstream and 9.953Gbps upstream bandwidth in XGS-PON mode, the XGPL-1000 is suitable for bandwidth-demanding applications such as HDTV, IPTV, VoIP, multimedia streaming, cloud services and IP surveillance networks.
The XGPL-1000 also supports existing GPON deployment while providing a smooth upgrade path to 10G PON networks. It is the perfect solution for service providers, system integrators and enterprises requiring a cost-effective, scalable and flexible fiber access network.
XG(S)-PON / GPON Combo Port
- 1 XG(S)-PON / GPON Combo PON port
- Supports GPON, XG-PON and XGS-PON tri-mode coexistence
- Supports adaptive switching via different optical modules
- GPON: 2.488Gbps downstream and 1.244Gbps upstream
- XG-PON: 9.953Gbps downstream and 2.488Gbps upstream
- XGS-PON: 9.953Gbps downstream and 9.953Gbps upstream
- Maximum transmission distance of up to 20km
- PON port supports up to 128 ONT/HGU devices
- Compliant with ITU-T G.984.x, ITU-T G.987 and ITU-T G.9807 standards
- Supports T-CONT DBA and x-GEM traffic
- Supports data encryption, multicast, port VLAN and user separation
- Supports ONT auto-discovery, link detection and remote software upgrade
- Supports power-off alarm function for easy link problem detection
Physical Ports
- 2 10/100/1000BASE-T RJ45 copper ports
- 1 10GBASE-SR/LR SFP+ uplink slot, compatible with 1000BASE-SX/LX/BX SFP
- 1 USB console interface for basic management and setup
- 1 XG(S)-PON / GPON Combo SFP+ PON slot
Switching
- Hardware-based 10/100Mbps half/full duplex and 1000Mbps full duplex mode
- Supports flow control, auto-negotiation and auto MDI/MDI-X
- Features Store-and-Forward mode with wire-speed filtering and forwarding rates
- IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
- Working with Rate Limit (Kbps) function
- Supports automatic address learning and address aging
- 8K MAC address table
- 30Gbps switch fabric
- 44.64Mpps forwarding rate
Uplink Port Management
- Traffic statistics and optical information display
- Port configuration for description, admin status, speed, flow control, isolation, PVID, broadcast and unicast storm limit, ingress and egress rate limit, and MAC limit
OLT Management
- User-friendly GUI management
- 2 control interfaces:
- Out-of-Band IP: USB serial port
- In-Band IP: Gigabit TP and 10G SFP+ uplink ports
- Supports ONT/HGU authentication to prevent illegal ONT access to the network
- Supports online ONT configuration and management
- Supports user management and alarm management
ONT/HGU Management
- ONT/HGU port control
- ONT/HGU VLAN mode
- ONT/HGU configuration and management
- ONT/HGU link detection
- ONT/HGU remote software upgrade
PON Management
- Traffic statistics and optical information display
- Port configuration for description, admin status, broadcast and unicast storm limit, ingress and egress rate limit
- PON range configuration and ALS configuration
- Supports VLAN division and user separation to avoid broadcast storms
- Supports broadcasting storm resistance function
ONU Management
- ONU List
- Automatic Discovery
- Automatic Learn
- ONU Image Upgrade
- Rogue ONU Table List and Config
Profile Management
- ONU profile configuration
- ONU profile binding
- Rapid deployment
Layer 3 IP Routing Features
- IPv4/IPv6 static routing
- Routing interface provides per VLAN routing mode
- Loopback function for all Ethernet and PON interfaces
- Supports dynamic/static ARP
- Supports WAN connection modes:
- Supports NAT and DMZ
Layer 2 Features
- Supports VLAN
- IEEE 802.1Q tag-based VLAN
- VLAN translation
- Provider bridging, VLAN Q-in-Q, IEEE 802.1ad
- PON P2P
- DSCP-to-CoS QoS mapping
- Supports bi-directional mapping between Layer 3 DSCP fields and Layer 2 CoS within VLAN tags
- Supports Spanning Tree Protocol
- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
- MAC table and PON MAC table display and aging configuration
- Link Layer Discovery Protocol (LLDP)
- Port mirroring to monitor incoming or outgoing traffic on a specific port
- Supports port isolation
- Supports port rate limitation
- Supports 4096 VLANs
Quality of Service
- Ingress and egress rate limit per port bandwidth control
- Dynamic Bandwidth Allocation (DBA) on PON interfaces
- Service Level Agreement (SLA)
- Upstream/downstream rate limitation based on each ONT/ONU/HGU
- 4 priority queues on all switch ports
- Scheduling for priority queues:
- Weighted Round Robin (WRR)
- Strict Priority
- Traffic classification:
- IEEE 802.1p CoS
- DSCP
- Precedence
- VLAN ID
- Policy-based ingress and egress QoS
Multicast
- Supports IPv4 IGMP snooping
- Supports IPv6 MLD snooping v1 and v2
- Supports 256 IP multicast groups
- Querier mode support
Security
- Authentication
- TACACS+ user access authentication
- IPv4/IPv6 Access Control List
- IP-based Access Control List
- MAC-based Access Control List
- Port-based Access Control List
- Protocol-based Access Control List
- DHCP snooping to filter distrusted DHCP messages
- Dynamic ARP inspection / restriction to discard ARP packets with invalid MAC address to IP address binding
- Transmission data encryption on the PON interface
WAN
- IPv4/IPv6/IPv4 & IPv6 versions
- Static / DHCP / PPPoE connection mode options
NAT
- NAT configuration options
- NAT DMZ Hosts
Management
- IPv4 and IPv6 dual stack management
- IPv4 DNS / IPv4 gateway
- IPv6 SLAAC / IPv6 gateway
- Switch management interfaces:
- Console
- Telnet Command Line Interface
- Web management
- SNMP management
- SSHv2 secure access
- SNMP management
- SNMP trap for interface Link Up and Link Down notification
- BOOTP and DHCP for IP address assignment
- Firmware upgrade via Web interface
- Configuration upload/download through Web interface
- Reset button for system reboot or reset to factory default
- User privilege level control
- Network Time Protocol (NTP)
- Network diagnostics:
- ICMP remote IP ping
- Traceroute diagnosis
- Remote syslog alarm
- System log
DHCP Functions
- DHCP relay
- DHCP Option 82
- DHCP snooping
- DHCP server
- DHCPv6 server
- DHCPv6 relay
1-Port XGS-PON OLT with 2-Port 10/1000/1000T + 1-Port 10G SFP+ and 1 AC + 1 DC
