The Finder cannot complete the operation because some data in "smb: //storage" could not be read or written. If you get this error message, use the IP address instead of STORAGE.
1. Log in as admin using your web browser.
2. Under SMB Server, make sure the folder you want to access is in the Sharing List.
3. Go to IP Config and make sure it is set to Automatic IP
4. Go to Network Information in the Status menu and write down the IP address you see there.
5. Go to your Finder and select Go/Connect to Server
6. Type smb: //IP/FOLDER and click on Connect. For the IP use the IP address you wrote down in step 4, for FOLDER use the folder name you added to the Sharing List in step 2.
If the LAN disk is connected directly to your computer using the Ethernet cable, the default IP address is 192.168.0.1.