[IGSW-2840] Why does the setting always back to default after Reboot the Switch? How can I save the setting forever?

There have two methods to save the setting. One is by using Console and one is Web UI.
Console:
(1)You can look for the Quick Installation Guide Page.10
(2)Follow the procedure below:

• Save the Configuration
　If want to save the configuration permanently, must copy the configuration to the non-volatile memory.
　On “Console#” prompt, type the following command and press .
　Console#copy running-config startup-config
　After press the <Enter> button and system will request to give the file name or just press <Enter> for default name.

Web UI:
To save all applied changes and set the current configuration as startup configuration. The startup-configuration file will be load automatically across a system reboot.

1. Click System --> File Management --> Copy Operation
2. Select “running-config to startup-config” as the file transfer method
3. Select the startup file name used for startup on the Industrial Managed Switch to overwrite or specify a new file name, then click Apply