[WNAP-1260] How to let the laptop connect to Repeater (WNAP-1260) automatically?

[Repeater Mode]
1) Please ensure your root AP has configured security key. Then, follow the instruction of section 4 in the Quick Guide to establish the connection between root AP & WNAP-1260.
**Note: For the first time setup, you can move WNAP-1260 close to the access point you wish to connect, after connection established, you can move WNAP-1260 to the place you wish to use.

2) After connected, please move WNAP-1260 to the place you wish to use.
In the system tray, double-click the wireless network icon, and then discover the WNAP-1260.
**Note: Please be noted that once established the connection with root AP via WPS button, the SSID and Security Key of WNAP-1260 will be the same as root AP.
In this case, the WNAP-1260 has been connected to WNRT-627 by WPS button, and the SSID and security key
have been synchronized as the same as root AP. So, you will see the WNAP-1260 displayed as the SSID “627”
in the list.

3) Check the option “Connect automatically”, and then click “Connect” button.

4) In the prompted dialog box, please enter the security key of your root AP’s.

5)After connected, go to “Network and Sharing Center-> Manage wireless networks”.

6) Ensure the WNAP-1260 has been saved to your wireless profile.