1)Connect WPG-200N to a monitor via VGA (D-sub) or HDMI cable.
2)Power on the WPG-200N, and then you will see the default screen shown as below.
Now, you can get the current IP address, SSID, and login code.
3) Configure the laptop’s IP address of wireless interface to static IP which is in the same subnet but not conflicted with WPG-200.
4) Then, use your laptop or desktop to site survey the wireless signal of WPG-200N. The default SSID is “WPG-200N”.
5) Open the web browser and it will redirect to WPG-200N web page automatically, or you can enter the IP address to access it (the default IP is 192.168.1.1).
6) Select “Admin”, and then enter the password to login the WPG-200N. (The default password is “admin”)
7) Now, you can configure it as your preference.