[KVM-800 / KVM-1600] I forgot the password of my KVM-800. How do I reset it?

Please refer to the procedure below to reset default password to 00000000.
1. Please connect keyboard, mouse, and monitor to local console and plug in the power adapter.
2. You can see the screen on the monitor as shown below:

3. There is a small square aperture (as circled in red) on the bottom of the KVM as shown in the picture below.

4. You can see two pins in this small square aperture (as circled in red).

5. Please use a wire to make these two pins become short-circuited and then the password will reset to default.