[HAC-1000] How to Enable the Scene by Schedule with HAC-1000?

Please see the steps below to enable the Schedule function.

Step 1. Go to System è Check whether the system time is synchronous with your client.

Step 2. Install the Z-Wave Sensor and Set the Scene.

For example, connect a light to the HZS-532E-EU power meter and set the Light ON and Light OFF.

Step 3. Go to Schedule è Enter Schedule Name Light ON è Select the Week Time è Select the Scene Light ONè Enable the Active

Step 4. Go to Schedule è Enter Schedule Name Light OFF è Select the Day Time è Select the Scene Light OFFè Enable the Active

Step 5. When the Schedule time is up, the light will be ON and OFF.

Note: Due to the bandwidth and network, the time may be delayed a little, which is normal.