[GS-5220-series,WGS-4215-series] How to setup switch for Video over IP products

The guide is suitable for the GS-5220 and WGS-4215 series.

(The example uses GS-5220-24UPL4XV and WGS-4215-16P2S models.)

If your network environment has any devices using Video over IP products, you need to enable features below on your Switch.

è Maximum Frame Size.

è IGMP Snooping Configuration.

è IGMP Snooping VLAN Configuration.

Use the login web management UI of the switch to log in.

è The default IP address is 192.168.0.100,and the username and password are both “admin”.

Note : Please set your PC’s IP address in the same subnet as the Ethernet Switch first.

[GS-5220 Series]

1. Maximum Frame Sizes.

è Switching à Port Management à Port Configuration à Input the value of Maximum Frame Size.

2. IGMP Snooping.

è Switching à IGMP Snooping à IGMP Snooping Configuration à Tick the “Snooping Enabled”,the “Unregistered ipMCv4 Flooding Enabled”,and the “Fast Leave of all ports”.

3. IGMP Snooping VLAN Configuration.

è Switching à IGMP Snooping à IGMP Snooping VLAN Configuration à Tick the “Snooping Enabled”,tick the “Querier Election”, and set the “Compatibility” as “Forced IGMPv2”.

4. Save Configuration.

è Click the “Save” icon at the top right side for the configuration saving page,Click the “Save Configuration” button to save the current configuration to FLASH.

[WGS-4215 Series]

1. Jumbo Frame.

è Port Management à Jumbo Frame à Enter the value of the Jumbo Frame.

2. IGMP Snooping.

è Multicast à IGMP Snooping à IGMP Setting à set the “IGMP Snooping Status” as Enable,set the “IGMP Snooping Version” as v2.

3. IGMP Snooping Querier Setting.

è Multicast à IGMP Snooping à IGMP Querier Setting à select the “VLAN ID”,set the “Querier State” as Enable,and set the “Querier Version” as v2.

4. Save Configuration.

è SAVE à Save Configurations to FLASH.