[IPX-Series (V3)] How to set up dial pattern

Applicable versions: IPX-330 (V3),IPX-2100 (V3),IPX-2200 (V2) and IPX-2500 (V3).

This document will show you how to set up a simple dial pattern via FXO trunks.

Case 1: Make any calls via FXO trunk on PBX

If you want make a call to outbound phone line to anywhere, you should follow these steps.

Step 1

Check the status of the FXO line. Ensure the FXO line was connected.

Path: Switchboard à Trunks

Step 2

Add a new dial rule.In the dial patterns field,input “X” and select the FXO line to connect.

Path: Outbound Control à Dial Rules

Step 3

Under the dial permission, add a new dial permission.Select the dial rules which you have done in step 2.

Path: Outbound Control à Dial Permission

Step 4

Edit the extension number profiles.Select the DailPlan1 and finished.

Case 2: Make internal calls only

You can call any extension number from internal group member,but it cannot call via internet or phone lines.

Step 1

Add new dial permission and select no dial rules.

Path: Outbound Control à Dial Permission

Check the rule which is empty.

Step 2

Edit the extension number features. Select the internalcalls and finished.

Case 3: Make international calls only

You can call any extension number to make international calls only via phone lines.

Step 1

Add a new dial rule.In the dial pattern field,input “zzx” and select the FXO line which is connected for the international calls.

Path: Outbound Control à Dial Rules

Step 2

Under the dial permission, add a new dial permission. Select the dial rules which you have done in step 2.

Path: Outbound Control à Dial Permission

Step 3

Edit the extension number features. Select the internationalCalls and finished.

Dial Pattern Table

X matches any digit from 0-9.

Z matches any digit from 1-9.

N matches any digit from 2-9.

. wildcard, matches one or more characters.

! wildcard, matches zero or more characters immediately.