[GS-5220, IGS-5225, IGS-6325 series] How to configure the Loop Protection feature.

The Loop Protection feature offers real-time protection against network loops.

For instance, if the Edge switch’s Loop Protection feature is enabled, when the Access switch has loop issue,

the Loop Protection will stop the traffic to prevent the broadcast storm. The application is shown below:

Here is a Loop Protection example where the steps are shown below:

1.  Set the Global Configuration as Enabled.

2.  Select the port which you want to enable the Loop Protection feature.

3. Set the Action as Shutdown Port to stop the traffic.

4. Set the Tx mode as Enabled to allow the port actively generates loop protection PDUs.