[LCG-300 series] Can I connect the LCG-300 to NMS-AIoT over the Internet?

Yes. Follow the configuration steps below:

1. Ensure that both the LCG-300 and NMS-AIoT have working Internet connections.

2. Log in to the LCG-300’s web management interface and navigate to LoRa → LoRaWAN Config.

• LoRaWAN Server Mode: Select “LoRaWAN UDP”.
• Email: Enter a contact email address (optional).
• Gateway ID: Enter the gateway ID (Device EUI; user-defined).
• Server Provider: Select “PLANET NMS-AIoT”.
• Server Address: Enter the public IP address of the NMS-AIoT server. If the server uses a dynamic public IP address, enter its registered DDNS domain name. 

3. Configure port forwarding and firewall access rules on the firewall or router at the NMS-AIoT site for the required service ports. The default ports are UDP 1700, TCP 1700, and TCP 1883.