During installing the ENW-9504 network card, Windows kept asking for a file called ENWPCI.SYS, but can not find this file on the CD?

Please use the following procedure to install the driver of ENW-9504.
Before you start with the installation process, make sure that your adapter should be properly installed in your PCI bus slot.
Executing Windows 98, it will auto-detect your system configuration and find the adapter hardware. ( If Win98 does not prompt that it detects the PCI Ethernet adapter,there must be something wrong with the Fast Ethernet adapter or your system enviroment.)
1. Press Next button while Add New Hardware wizard appear.

2. Please select "Search for the best driver for your device", then press Next button.

3. Select "Specify a location", then insert the driver CD and specify the setup file pathname [CDROM]:\WIN98

4. Windows 98 will appear some messages to insert Windows 98 system disk to complete setup step.

5. Windows 98 will finish the other installation procedure automatically, then ask you restart the system.

This problem is caused by we misplaced a .inf file on the ECD-9504V7 CD-ROM. However, if the users use the above installation procedure, the installation will be OK without any problem.
We have corrected this problem in the new CD. And if your network cards are with floopy disk, it will also do not have this problem.
You can also download the latest driver of ENW-9504 by the following link:ftp://ftp.planet.com.tw/NIC/enw9503/enw-9503_9504v6.zip