FAQs

Different operate temperature.

The GSW-1600HP is designed with over power loading protection functions. Please make sure that your total PoE output is within 220Watts. If your PD device is the IEEE 802.3at (standard) and it needs 24Watts for powering up, the GSW-1600HP only can power up to 9 of your PD devices.

The FGSW-2620 Gigabit Switch provided high performance 24-Port 10/100Mbps + 2 10/100/1000Mbps Ethernet port. The extra two Gigabit ports make FGSW-2620 to be a Gigabit back bone Switch in Gigabit Network. For example, you can attach PC workstation groups to 10/100Mbps port and then attach Storage Server (such as NAS Server) to one of Gigabit port, finally use another Gigabit port connect to Gigabit back bone Network.

yes, due to per port of GSW-1601v3 / GSW-2401v3 support Auto negotiation ability and it can run at 10/100/1000Mbps half / full duplex mode.

Yes. The GSW-1601v3 / GSW-2401v3 support 9K Jumbo frame size.

Please press Reset button at front panel for 5 seconds then the FGSW-2620VM will reset to factory default mode (username and password: admin, default IP address: 192.168.0.100)

Solution:
a.One of the key advantages of SGSW-24240 is that each of the SFP slot supports Dual-Speed, 1000Base-SX / LX or 100Base-FX; that means, the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required.

b.For 1000Base-SX/LX and 1000Base-BX WDM SFP fiber-optical modules. The following PLANET Gigabit SFP transceivers are available for SGSW-24240:

c.For 100Base-FX and 100Base-BX WDM SFP fiber-optical modules. The following PLANET 100Mbps SFP transceivers are available for SGSW-24240: