FAQs

Solution:
The WGSD-10020 / WGSD-10020HP support SFP type auto-detection. However, some of the SFP transceiver can not report the type information at the moment of plug into the slot. As a result, WGSD-10020 / WGSD-10020HP could encounter the detection / synchronization issue and can not runs smoothly.
In such circumstance, we would suggest to pre-setup the port(s) that is going to attach 100Base-FX SFP transceiver to 100 Force mode in the Web page (as figure below), that shall make the connection error free.

At temperature 0 ~ 40 degrees C range, FNSW-2400PS PoE output can achieve 100%. Due to the PSU hardware design, if the temperature arises up to 50 Degree C, it will reduce 20% of Power Budget and higher temperature will reduce the total output power as a result.

At temperature 0 ~ 40 Degrees C range, FNSW-1600P PoE output can achieve 100%. Due to the PSU hardware design, if the temperature arises up to 50 Degree C, it will reduce 20% of Power Budget and higher temperature will reduce the total output power as a result.

yes, due to per port of GSW-1601v3 / GSW-2401v3 support Auto negotiation ability and it can run at 10/100/1000Mbps half / full duplex mode.

Yes. The GSW-1601v3 / GSW-2401v3 support 9K Jumbo frame size.

Different operate temperature.

A: Solution:
The WGSD-10020 supports SFP type auto-detection. However, some of the SFP transceiver can not report the type information at the moment of plug into the slot. As a result, WGSD-10020 could encounter the detection / synchronization issue and can not runs smoothly.
In such circumstance, we would suggest to pre-setup the port(s) that is going to attach 100Base-FX SFP transceiver to 100 Force mode in the Web page (as figure below), that shall make the connection error free.