Corporate APP
Please press the reset button for 5 seconds to restore factory setting. System default user name and password: admin
Please confirm first whether any file is downloading or any operation on disk. Close all the application programs accessing NAS probably, and then try again.
By default, the Video Mode is selected.
Graphic Mode: It’s usually for the static state video. Pictures are the main display contents, and the pixel update processing is not so fast. The CPU consumption is lower than video mode.
Video Mode: It’s usually for the dynamic state video. Videos are the main display contents, and the pixel update processing is fast. The CPU consumption is higher than graphic mode.
The default port number are 873 and 22. You have to open these two ports for SmartSync tasks.
You can follow the steps below to set up email event:
1. Go to NAS-7410 Admin Home page and select "Network Settings".
2. Select the sub menu "Email".
3. Enable SMTP Protocol.
4. Fill in correct SMTP server IP address or Fully Qualified Domain Name (FQDN). (*If you fill in FQDN, please make sure you have set DNS server IP address inside NAS-7410.)
5. Fill in a legal user account for login SMTP server purpose.
6. Based on your need, fill in one or two Email Addresses.
7. Click "Apply" and then select "Event" menu to configure further settings.
8. Click "Advance" button in "Configuration" sub menu of "Event".
9. Enable "Email Alert".
10. Check "Event List for Notification" to decide which events can be sent to administrator via email.
11. Click "Apply" button to complete settings.
The audio function can be switch or not switch when you switch the PCs by keyboard. You can refer to our manual to know how to switch the PC with the audio function at the same time.
Yes. The USB and PS/2 interface can work to the PC at the same time. But, we will still suggest you just choose one of them to your PC. That can prevent the PC confuse, due to there are same signal from different interface.
