FAQs

The download function only works with a well installed internal drive. Make sure that a HDD or CF card is installed and it is recognized by the DSP-1000 before you enable the download function. Also check the update.dsp and down.lst file to see if all paths are correct.

Make sure you have saved the new settings, then exit the Setup menu and restart the DSP-1000 by turn off the power switch. Turn it on few seconds later to make the setting take effect..

• For BitTorrent, users need to set up port forwarding on the TCP port range 6881-6890 of Access Point or IP sharing device for ITB-3001.
• Your Internet bandwidth will limit BT download speed
• BT is a peer- to-peer download technology. It requires more people or torrents to share the files at the same time.

• Check your wired connection to make sure that it’s working properly. Use an Ethernet cable to connect from the Network jack of the ITB-3001 to the network router or Access Point.
• Check your Network Setting of the Setup menu.
• Check the setting on the shared folder/file on your computer.

• Check the power cord connection. Or connect the power cord to another power outlet.
• Are the Component Y/Pb/Pr/ AUDIO L/R cables or HDMI Cable loose or disconnected? Make sure one of connections is correct.
• Try the "SOURCE" button on the remote control of the external display/ TV, to select the correct input source.

Please select Control Panel and then click Appearances and Themes, to
Change the Screen Resolution and adjust the correct screen resolution.

If the device unoccupied for a moment, please press 「Scroll Lock」+「Scroll Lock」+「M」to restart the device.