Corporate APP
When the NAS-7450/7850 occurs some critical events, you will find a message "There are critical events. Please Check Web Reminder page." in Admin Home page. The intention is reminding administrator to check those critical events as most quick.
The USB specification limits the length of a cable between two devices to 5 meters.
Yes. Powerline technology is based on the HomePlug standard. You will need to purchase a PLANET Powerline adapter (Ex: the PL-702) with the same speed and specifications as your existing adapter.
Yes. Powerline technology is based on the HomePlug standard. You will need to purchase a PLANET Powerline adapter (e.g. the PL-751) with the same speed and specifications as your existing adapter.
85Mbps is the theoretical speed rate. Actual throughput will vary with the real environment. Some specific factors like the power fluctuations EM interference in your house, such as refrigerators, washer/dryer, microwaves, hair dryers, etc. and it may affect your network speed through the power system.
This button can use to reset combo KVM to default settings. Please press this button over 10 seconds, and then release it. The combo KVM switch will reset to factory default.
If the network adapter does not connect to the network
1. Update Driver: Make sure that you have the latest version of the 10/100 CardBus driver.
2. Update BIOS: Check with your Notebook PC manufacturer for the latest BIOS upgrade to support CardBus.
3. Check Cable Connections: Make sure your network connection is secured and functioning properly. You may need to replace cables with known good cables.
4. Check LED Status: Make sure the Link LED lights are lit properly on the card and Hub (if applicable).
5. Check Device Status: For Windows 98 or Windows 95: make sure that your device driver does not have a red "X" or yellow "!" shown in the Device Manager. For Windows NT 4.0: check the Event Viewer to make sure there are no resource conflicts.
Install the Adapter and Driver again
If the device status shows that the adapter is not working properly. You will need to remove the network adapter driver and related network components, then install it again.
