FAQs

Please refer to the following steps to set the Power Schedule On/Off.
Step 1. Go to “Time Setting” to confirm a time in the Time Sync Frequency.

Step 2. Go to “Schedule On/Off” to set the power to Off.

Step 3. Go to “Schedule On/Off” to set the power to On.

Step 4. Save the setting.

Step 5. Done

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

You can follow the steps below to set up email event:
1. Go to NAS-7410 Admin Home page and select "Network Settings".
2. Select the sub menu "Email".
3. Enable SMTP Protocol.
4. Fill in correct SMTP server IP address or Fully Qualified Domain Name (FQDN). (*If you fill in FQDN, please make sure you have set DNS server IP address inside NAS-7410.)
5. Fill in a legal user account for login SMTP server purpose.
6. Based on your need, fill in one or two Email Addresses.
7. Click "Apply" and then select "Event" menu to configure further settings.
8. Click "Advance" button in "Configuration" sub menu of "Event".
9. Enable "Email Alert".
10. Check "Event List for Notification" to decide which events can be sent to administrator via email.
11. Click "Apply" button to complete settings.

Yes, a specific language home page of the NAS-7410 will be shown in your different language web browsers. It depends on the language version of web browser installed in your client.

SmartSync does not use CIFS/SMB, FTP or NFS as its communication protocol. It is based on SSL over TCP/IP. This also means SmartSync has its own security policy and won't refer to SMB, FTP or NFS security setting.

SmartSync currently supports data synchronization only from NAS-7410 to other NAS-7410 servers. We may consider implementing data synchronization from Windows platform to NAS-7410 at the second stage.