Corporate APP
You can follow the steps below to set up email event:
1. Go to NAS-7410 Admin Home page and select "Network Settings".
2. Select the sub menu "Email".
3. Enable SMTP Protocol.
4. Fill in correct SMTP server IP address or Fully Qualified Domain Name (FQDN). (*If you fill in FQDN, please make sure you have set DNS server IP address inside NAS-7410.)
5. Fill in a legal user account for login SMTP server purpose.
6. Based on your need, fill in one or two Email Addresses.
7. Click "Apply" and then select "Event" menu to configure further settings.
8. Click "Advance" button in "Configuration" sub menu of "Event".
9. Enable "Email Alert".
10. Check "Event List for Notification" to decide which events can be sent to administrator via email.
11. Click "Apply" button to complete settings.
Yes, a specific language home page of the NAS-7410 will be shown in your different language web browsers. It depends on the language version of web browser installed in your client.
The default port number are 873 and 22. You have to open these two ports for SmartSync tasks.
Each NAS-7410 can perform 8 tasks simultaneously, including immediate and scheduled ones. However, we do not recommend running too many tasks at the same time, since running more tasks means more system resources are required as well as the network bandwidth. This will greatly affect the performance of NAS-7410 and the network.
If we do not control the bandwidth for the data stream when SmartSync is performing its tasks, the synchronous connection may occupy a lion share of the whole network bandwidth, making the server or network unable to provide other services to the clients at a good performance, especially those at the remote network area. Although most enterprises are now using broadband connections, they normally provide various services using these connections. To prevent SmartSync from occupying too much of the network bandwidth, it is recommended to set up Bandwidth Control during execution of the tasks. Some parameters to be considered are: 1. the total bandwidth and the distribution of bandwidth that the enterprise has in its network environment; 2. the frequency of accesses by the clients and the number of clients served by NAS-7410.
SmartSync currently supports data synchronization only from NAS-7410 to other NAS-7410 servers. We may consider implementing data synchronization from Windows platform to NAS-7410 at the second stage.
Because SmartSync is a memory-consuming operation, memory utilization rate is critical when launching this task. When NAS-7410 detects the free memory is low, the program will terminate the synchronization task. To avoid this situation, we suggest checking the following configurations or timing before launching SmartSync task.
1. Set the SmartSync task to perform at non-rush hour to avoid memory conflict with routine network services.
2. Set a proper SmartSync source path. If the SmartSync source includes up to millions files/directories, that will occupy most of the memory capacity when creating check list, it is suggested assigning the source path in multiple sub-directory in different tasks.
