FAQs
FAQ Subject
DB9 Pin Define for RS-232：
|
DB9-PIN |
RS-232 |
|
|
|
1 |
DCD |
|
2 |
RXD |
|
|
3 |
TXD |
|
|
4 |
|
|
|
5 |
GND |
|
|
6 |
|
|
|
7 |
|
|
|
8 |
|
|
|
9 |
RI |
Terminal Block Define for RS-422/485：
|
Terminal Block Pin |
4-wire for RS-422 |
2-wire for RS-485 |
|
|
|
RX+ |
RX+ |
Data A(+) |
|
RX- |
RX- |
Data B(-) |
|
|
TX+ |
TX+ |
|
|
|
TX- |
TX- |
|
Yes. PLANET provide following wide temperature SFP module that can
operate under -40 to 75 Degree C.
|
MGB-TSX |
SFP-Port 1000Base-SX mini-GBIC module - 550m |
|
MGB-TLX |
SFP-Port 1000Base-LX mini-GBIC module - 10km |
|
MGB-TL30 |
SFP-Port 1000Base-LX mini-GBIC module - 30km |
|
MGB-TL70 |
SFP-Port 1000Base-LX mini-GBIC module - 70km |
The major differences are the number port of the fiber interface and the fiber-optic distance. The difference is as table below.
|
Model Name |
ISW-511T |
ISW-511TS15 |
ISW-621T |
ISW-621TS15 |
ISW-621TF |
|
|
100Base-FX Fiber |
1 |
2 |
||||
|
Fiber Distance |
2 km |
15 km |
2 km |
15km |
Depend on SFP Module |
|
|
Fiber Mode |
Multi-Mode |
Single-Mode |
Multi-Mode |
Single-Mode |
Single / Multi |
|
For our PLANET Transceiver Module, the longest distance will be 60km – MFB-F60. Depend on your needs, you can choose the suitable PLANET Transceiver Module.
|
Ordering Information |
|
|
MFB-FX |
SFP-Port 100Base-FX Transceiver (1310nm) -2km |
|
MFB-F20 |
SFP-Port 100Base-FX Transceiver (1310nm) - 20km |
|
MFB-F40 |
SFP-Port 100Base-FX Transceiver (1310nm) - |
|
MFB-F60 |
SFP-Port 100Base-FX Transceiver (1310nm) - |
|
MFB-FA20 |
SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm)- |
|
MFB-TF20 |
SFP-Port 100Base-FX Transceiver (1310nm) - |
|
MFB-TFX |
SFP-Port 100Base-FX Transceiver (1310nm) - |
|
MFB-FB20 |
SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) - |
Please refer to the attached calculation to select your PV panel and battery for more understandings, thank you.
BSP-360_PV&BAT_Calculation_v1.0.xls
Yes, due to each RJ45 port of the IGS-501 / IGS-801 supports auto negotiation and it can run at not only 1000Mbps full-duplex but also 10/100Mbps half/full-duplex mode.
Yes, due to each RJ45 port of the IGS-501T / IGS-801T supports auto negotiation and it can run at not only 1000Mbps full-duplex but also 10/100Mbps half/full-duplex mode.
