FAQs

This DIP switch is for system input voltage selection. Please assure the setting of AC DIP switch with local voltage is compatible, otherwise, it will cause device damage.
115V AC for 100V to 120V AC input voltage.
230V AC for 200V to 240V input voltage. (Factory default mode)

Currently NO, when connects BNC and RJ-11 interface at the same time, the signal will influence each other and might causing the disconnection, bad performance or shorten the distance. Therefore, we strongly not prefer to connect the BNC and RJ-11 at the same time.

The IGS-801M Managed Industrial Switch is implemented with "Rest" button. To reset the IP address to the default IP Address "192.168.0.100" or rest the password to default value. Press the hardware reset button at the bottom panel about 10 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx.

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

Regarding this detail descriptions, it is suggested to download the product and read the documentation for more understandings, thank you.

Yes, it can. The IGS-10080MFT supports AC 24V power.

Yes, they can. However, please be noted that the IGS-10080MFT supports DC power from 12V to 48V and supports AC power of 24V only.