The number can be connected is 36 pairs (72 units).It is necessary for PL-701 that the power for all the rooms should be from same phase. Different phase of the PL-701 is not able to connect to each other.
A:There are two different standards:
1) Homeplug 1.0/1.0 Turbo for 14Mbps & 85Mbps, such as PL-104 and PL-420
2) Homeplug AV for 200Mbps, 500Mbps, and 1G, such as PL-702
It should work with the same HomePlug AV device which is another PL-702.
It could co-existence with HomePlug 1.0 or HomePlug 1.0 Turbo such as PL-104 or PL-420 in the same domain, but cannot connect with PL-104 and PL-420 (Homeplug 1.0)
A:The number can be connected is 8 pairs (16 units).It is necessary for PL-702 that the power for all the rooms should be from same phase. Different phase of the PL-702 is not able to connect to each other.
A:Fast Ethernet is full-duplex, so a port can transmit and receive simultaneously. Consequently, if a Fast-Ethernet port is performing at its maximum throughput (e.g. sending and receiving) it can operate near it's theoretical maximum - 500Mbps.
A:Environmental factors, Operational overhead, differences between different transport standards (UDP vs. TCP vs. WFT) and the way each standard optimizes the data overhead (typically for error handling)
A:Pick a plug is a technology that allows you to determine how fast your Powerline connection is - simply by looking at a multi-color LED on the front of the device. Green is the fastest possible connection. Orange indicates a less than optimal connection. Red indicates that you might experience poor performance and should consider moving one of the devices to a different outlet.
A:No, we suggest not install at big building. Please refer to the following points for more understandings:
1.PL-702 must build in the same power loop, if the loop is different that can cause disconnect. Based on experience, the big buildings will have many different loops.
2.PL-702 maximum distance is 300M, if it is over that can cause signal failure and disconnect.
3.IF the powerline is old or broke and cause signal failure and disconnect.
4.The maximum number is 16 PCS for one PL-702 after another PL-702 at the same power loop.