Corporate APP
Pick a plug is a technology that allows you to determine how fast your Powerline connection is -- simply by looking at a multi-color LED on the front of the device. Green is the fastest possible connection. Orange indicates a less than optimal connection. Red indicates that you might experience poor performance and should consider moving one of the devices to a different outlet.
Environmental factors, operational overhead, differences between different transport standards (UDP vs. TCP vs. WFT) and the way each standard optimizes the data overhead (typically for error handling)
When your rate of PL-751 is low, please refer to the following steps to improve the quality.
1. Please check whether your Powerline adapters are separate by power outlet. If yes, please move the adapter on the outlet to the wall.
2. Please check whether there is electrical equipment which has electromotor inside around the Powerline adapters. Such equipment can be air-conditioner, washing-machine, electric fans, etc. Please move such equipment to other places or move Powerline adapters away from such equipment. What is more, you can buy a power outlet which has surge protector function and plug such equipment to the outlet to avoid interference.
3. Please check whether there is AC power adapter that is used for mobile phone, laptop or something else around the adapter. If the quality of AC power adapter is not good, it may make great noise to the power line circuit. Please move it to the other and move it far away from the Powerline adapters.
4. Please check whether the distance between the adapters is long enough. In theory, the longest distance is 300 meters. However, with the interference and line quality, it’s hard to reach 300 meters.
Press the RST button (on the side) continuously for 5 seconds to restore ADN-4102 to the default setting. The default IP, username and password are 192.168.1.1, admin and admin.
The default setting of xDSL port is “disabled”. Please log on to the XDL-2420R and enable the xDSL port manually.
