FAQs

Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and the router, and there are two types of WPS: Push-Button Configuration (PBC), and PIN code.
You don't have to select encryption mode and input a long encryption pass phrase every time when you need to setup a wireless client, you only have to press a button on wireless network client and the router, and then WPS will do the setup for you.

Please refer to the Power point file FAQ_How to quick setup AnnexMforIDL.pps for the setup procedule.

The IDL supports G.992.5 ADSL 2 + Annex M, this will increase the Up Stream bandwidth of ADSL 2+ and Annex M supported ADSL 2+ CDE modem.

In this power point file, we use the ADE-3400 as the example, however, it will apply to all the PLANET ADSL 2+ & Annex M suported CPE modem Router.

Maybe the EPN-103 PON port doesn’t detect the Fiber light from OLT, please try to swap other Fiber Cable or EPN-103.

802.11n is a draft high-speed wireless standard. In addition to throughput, 802.11n will significantly enhance the reliability and range of existing 802.11 networks.
The standard defines procedures by which throughputs greater than 100Mbps and significant range improvements also are possible. Some of the important features that are included in current 802.11n draft are multiple-input multiple-output (MIMO), channel bonding and packet aggregation.
The MIMO technology uses several antennas to move multiple data streams from one place to another. Instead of sending and receiving a single stream of data, MIMO can simultaneously transmit three streams of data and receive two. This allows more data to be transmitted in the same period of time.
The IEEE 802.11n not only extends the range, or the distance over which data can be transmitted, but also increases the amount of data that can be transmitted.

(1)Find the other AP have the WDS feature.
(2)The SSID with the both AP must be the same.
(3)The wireless channel must be the same.
(4)The subnet for the both AP must be the same but not the same IP address.
(5)Fill the wireless MAC address each other.
(6)The encryption method and the password must be the same.
Note: We recommend use the same brand or the same model modem to established the WDS connection, otherwise the WDS connection maybe not be work

The default setting of xDSL port is “disabled”. Please log on to the XDL-2420R and enable the xDSL port manually.

No, you can't. The ADN-4000v2 equips with two dipped antennas inside the device.