FAQs

Please refer to the application guide, it can be obtained from ftp://ftp.planet.com.tw/FAQ/Network Security/FAQ-WSG500_1.pps

WSG-500 supports monitoring IP for 40 network devices, e.g. WSG-ACG5 Thermal Printer, IP Camera, AP, Printer Server. This function is for checking if all services are activating or not.




Configure the internal IP of those devices in the Monitor IP Address List, and click Create button one by one. Then click Apply and Monitor Now.




The green signal indicates the device works normally.
The red signal indicates there is some problem with the connection or the device.

There are Authorize.Net, PayPal, SecurePay, WorldPay, 4 kinds of external payment gateway supported by WSG-500.

For example of Cyber Cafe, because of the reason for saving more power, the owner usually switch the idle computers to sleeping mode. When some guests book the computers, the owner can wake up them by Ethernet in advance to save time. And the owner can also configure all the computers entering into sleeping mode automatically after the guests log off.

No.
The WNAP-1110 supports only 9VDC power Adapter or Passive POE Injector (RJ45 pin 4, 5: + 9VDC; pin 7, 8: Ground). It can not work with IEEE802.3af PSE for its power source.
At the same time, either 9VDC Adapter from the DC-jack or Passive PoE Injector from the UTP port to the device at one time. Use of two power sources will damage the device permanently.

Regarding this detail descriptions, it is suggested to download the product FAQ.

Regarding this detail descriptions, it is suggested to download the product FAQ.