FAQs

                                        Topology

Purpose:

This is an intercom demonstration setup between doorphone (HDP-1160PT) and video intercom (VTS-700P) via P2P to open the door lock.

1. VTS-700P configuration

This is the setting to trigger the door lock via DTMF protocol.

2. HDP-1160PT Configuration

3. HDP-1160PT è Door Lock connection

4. To open the door lock via VTS-700P

    A. Press the Janitor tab first.

     

    B. Then press the Key tab to open the door lock.

     

The following devices are selected for making point to point calls:

Equipment 1 : HDP-1100PT (IP 192.168.1.76)

Equipment 2 : VTS-700P (IP 192.168.1.71)

Equipment 3 : ICF-1800 (IP 192.168.1.220)

The network segment must be the same.

 

Application 1

HDP-1100PT is dialing to VTS-700P

HDP-1100PT (192.168.1.20)

Path: Service à SIP

1. Setting up the Dial Button : 123@192.168.1.71:5060

2. Save and reboot.

Note : 123 is free to set up to ensure the IP address of VTS-700P and port 5060.

After it is finished,you can dial now. 

Application 2

VTS-700P is dialing to HDP-1100PT

VTS-700P (IP 192.168.1.71)

Step 1

Path: Intercom à Camera

1.Set up the URL : rtsp://admin:admin@192.168.1.76/cam1/h264

2.Save the configuration.

HDP-1100PT (192.168.1.76)

Step 2

1.Setting the ERL:/cam1/h264

2.Save and reboot the device.

Now you can press the camara button on VTS-700P to view the HDP-1100PT.

Application 3

ICF-1800 is dialing to HDP-1100PT

HDP-1100PT (192.168.1.76),ICF-1800 (IP 192.168.1.220)

1.Setting up the Dial Button : 123@192.168.1.220:5060

2.Save and reboot.

Note: 123 is free to set up to ensure the IP address of ICF-1800 and port 5060.

After it is finished, you can dial now.

The ICF-1800 will show the IP of the person who is dialing.

Application 4

HDP-1100PT is dialing to ICF-1800

Dial number: 192*168*1*76 = Calling to 192.168.1.76