FAQs

Yes, due to each RJ45 port of the IGS-501 / IGS-801 supports auto negotiation and it can run at not only 1000Mbps full-duplex but also 10/100Mbps half/full-duplex mode.

Yes, due to each RJ45 port of the IGS-501T / IGS-801T supports auto negotiation and it can run at not only 1000Mbps full-duplex but also 10/100Mbps half/full-duplex mode.

Yes, due to each RJ45 port of the ISW-511T / ISW-621T series supports auto negotiation and it can run at 10/100Mbps Half/Full-Duplex mode. Each Fiber port of the ISW-511T / ISW-621T series supports 100Mbps Full-Duplex mode.

Yes, due to each RJ-45 port of ISW-511 / ISW-621 series support Auto negotiation and it can run at 10/100Mbps half / full-duplex mode, each Fiber port of ISW-511 / ISW-621 series support 100Mbps full-duplex mode.

The IGS-801M Managed Industrial Switch is implemented with "Rest" button. To reset the IP address to the default IP Address "192.168.0.100" or rest the password to default value. Press the hardware reset button at the bottom panel about 10 seconds. After the device is rebooted, you can login the management WEB interface within the same subnet of 192.168.0.xx.

Yes, it can. The IGS-10080MFT supports AC 24V power.

Yes, they can. However, please be noted that the IGS-10080MFT supports DC power from 12V to 48V and supports AC power of 24V only.