Efficient Full PoE+ Power and Gigabit Extension Solution Ideal for Hardened Environment
With the Plug and Play configuration, PLANET IFGS-1022HPT Industrial-grade, DIN-rail type Unmanaged Fast Ethernet PoE+ Switch featuring 8 10/100BASE-TX 802.3at PoE+ ports and 2 additional Gigabit copper/SFP combo interfaces for Gigabit Ethernet extension and video uplink is ideal for easily setting up a heavy industrial infrastructure.
The IFGS-1022HPT is designed with redundant power system and thus, it is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with a total power budget of up to 240 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.
802.3at PoE+ Power and Ethernet Data Transmit Distance Extension
The IFGS-1022HPT has a built-in solid DIP switch providing “Standard” and “Extend” operation modes. The IFGS-1022HPT operates as a normal IEEE 802.3af/at PoE+ Switch in the “Standard” operation mode. In the “Extend” operation mode, the IFGS-1022HPT operates on a per-port basis at 10Mbps full duplex operation and can support 30-watt PoE power output over a distance of up to 250 meters, overcoming the 100-meter limit on Ethernet UTP cable.
Two Gigabit Uplink Ports
The IFGS-1022HPT provides 2 extra Gigabit TP/SFP combo interfaces that enable network administrators to increase their network bandwidth to relieve traffic congestion when the 2 uplink ports are used to connect PoE-capable devices, such as NVR, video streaming server, NAS and more. With the combo design, administrators can easily connect and supply power to PoE-capable devices no matter how large the network expansion is.
Flexibility and Long-distance Extension Solution
Through the two shared Gigabit-speed fiber SFP slots, it can also connect with the 1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the industrial data centers and distributions.
Environmentally Hardened Design
With the IP30 metal industrial case, the IFGS-1022HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. Being able to operate under the temperature range from -40 to 75 degrees C, the IFGS-1022HPT can be placed in almost any difficult environment.
The IFGS-1022HPT provides contact discharge of ±6KV DC and air discharge of ±6KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
Safe and Easy PoE Network Deployment
Carrying both Ethernet data and power simultaneously, the IFGS-1022HPT reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. It helps users to utilize just one Ethernet cable to install and deploy IP camera, wireless AP or VoIP phone more efficiently and cost-effectively.
Industrial-grade PoE+ Switch for Building Automation and Security
Suitable for buildings where security is strictly enforced, the IFGS-1022HPT, with eight Fast Ethernet 802.3at PoE+, in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 8 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the IFGS-1022HPT makes the installation of IP cameras or wireless APs easier and more efficient.
Perfect Integration Solution for IP PoE Camera and NVR System
The IFGS-1022HPT provides eight 10/100BASE-TX 802.3at PoE+ ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the two 1000BASE-X SFP combo interfaces, the IFGS-1022HPT can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the IFGS-1022HPT facilitates the recorded video files from the 8 PoE+ IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The IFGS-1022HPT undoubtedly brings an ideal secure surveillance system at a lower total cost.
Power over Ethernet
Industrial Case and Installation
|Fast Ethernet Copper Ports||Eight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Ports 1 to 8)|
|Gigabit Ethernet Copper Ports||Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
(shared with Ports 9 to 10)
|SFP/mini-GBIC Slots||Two 1000BASE-SX/LX/BX SFP interfaces (shared with Ports 9 to 10)|
|PoE Injector Port||Eight ports with 802.3af/802.3at PoE+ injector function (Ports 1 to 8)|
|DIP Switch (Port-1 to Port-8)||Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps
Extend mode: 30-watt PoE transmit distance of 250m at speed of 10Mbps
|Connector||Removable 6-pin terminal block
■ Pin 1/2 for Power 1
■ Pin 3/4 for power fault alarm
■ Pin 5/6 for Power 2
|Alarm||One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V AC
|Power Requirements||48~54V DC, 5.5A (max.) (>51V DC for PoE+ output recommended)|
|Power Consumption/ Dissipation||4.3 watts, 14.6BTU (Standby without PoE function) at DC 54V power input
256 watts, 873BTU (Full loading with PoE function) at DC 54V power input
|Dimensions (W x D x H)||66 x 107 x 152 mm|
|ESD Protection||6KV DC|
|Enclosure||IP30 metal case|
|Installation||DIN-rail kit and wall-mount kit|
|LED||3 x LED for System and Power:
■ Green: DC Power 1
■ Green: DC Power 2
■ Red: Power Fault Alarm
2 x LED for PoE Copper Port (Port-1~Port-8):
■ Green: LNK/ACT (10/100Mbps)
■ Amber: PoE-In-Use
2 x LED for 10/100/1000T Copper Port (Port-9~Port-10):
■ Green: LNK/ACT
■ Amber: 1000
2 x LED for per mini-GBIC interface (Port-9~Port-10)
■ Green: LNK/ACT
■ Amber: 1000
|Switch Throughput@64 bytes||4.1Mpps @64 bytes|
|MAC Address Table||16K entries|
|Shared Data Buffer||4Mb SRAM|
|Flow Control||IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
|Jumbo Frame||10 Kbytes|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at Power over Ethernet Plus/PSE|
|PoE Power Supply Type||End-span|
|Power Pin Assignment||1/2(+), 3/6(-)|
|PoE Power Output||IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~54V DC (depending on the power supply), max. 30 watts
|PoE Power Budget||Dual power input: maximum 240W (depending on power input)|
|Max. Number of Class 2 PDs||8|
|Max. Number of Class 3 PDs||8|
|Max. Number of Class 4 PDs||8|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Stability Testing||IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
|Operating Temperature||-40 ~ 75 degrees C|
|Storage Temperature||-40 ~ 85 degrees C|
|Humidity||5 ~ 95% (non-condensing)|
|2023-01-07||3.0||Release for hardware verison 3.0.|
|Industrial 8-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/ SFP Combo Ethernet Switch (-40~75 degrees C)|