[ICS-10x] How to set up the RS-485 device with the ICS-10x?

Example: The use want to use the ICA-651 and CAM-KB300 with ICS-100.

1) Open the ICS-100 Web interface then changed the Serial port configuration as below.


2) Open one ICS-100 Web interface then changed this ICS-100 operation
　mode "TCP Server" and set the parameter as below:


3) Open the other ICS-100 Web interface then changed this ICS-100 operation
　mode "TCP Client" and set the parameter as below:


4) Connect the cable with ICS-100's DB9 Pin define RS-485 signal to
　ICA-651 RS-485 signal.
　(RS-485 + connect RS-485 +, RS-485 – connect RS-485 - ).


5) Connect the cable with ICS-100's DB9 Pin define RS-485 signal to
　CAM-KB300 RS-485 signal.
　(RS-485 + connect RS-485 +, RS-485 – connect RS-485 - ).


6) Then the control keyboard cans remote control the IP camera.

RRegarding this detail descriptions, it is suggested to download the product FAQ: ftp://ftp.planet.com.tw/FAQ and read the documentation for more understandings, thank you.