Corporate APP
This message will appear if there is no 000.avi or 000.jpg & 000.mp3 file on the local drive. It will also appear if a numeric button is pressed but there is no such a file. Make sure to rename your files properly and store them on the local drive, and try again.
For 10GBase-SR/LR fiber-optical modules. The following PLANET 10GBit/s SFP+ transceivers are available for ENW-9801:
MTB-LR:
SFP+ Port 10GBase-LR mini-GBIC module (Single mode / 1310nm / max. 10km)
MTB-SR:
SFP+ Port 10GBase-SR mini-GBIC Module (Multi-mode / 850nm / max. 550m)
Yes.
ENW-9801 can be used in the PCI-E x 16 slot or PCI-E x 8 slot - although the attachment interface of ENW-9801 is PCI Express Host bus, 8 lanes.
No, DMA-200 supports the Netowrk Neighhood feature in the firmware version 1.17.50 or above.If your PC already turn on the file share, then you can just key in the name of the PC or NAS using the IP Address or UNC and together with the shared folder name. Then, the DMA-200 can easily and quickly connect to the target PC or NAS.
Please follow the steps below to turn on the features.
1. Please check the firmware of your DMA-200 is at least version 1.17.50 (You can check the firwmare verstion from Setup -> Version on DMA-200)
2. Configure the Network Neighood (From Setup -> System Setup -> Other Settings -> Network Option, please enable “Samba Client”)
3. Key in the IP address and the shared folder name in the format on “Samba Client Share” field
e.g
//192.168.0.3/MyDocument
//192.168.0.100/Movies
//NAS7100/Photos
johhson@PWD//NAS7200/Music
Where there are IP of the PCs, UNC of the NAS, name@password in front of the double slash for login name and password.
4. After return to the main menu, and you can go to “My Media” option,the above devices (if existed on the network) will show up in the file list, then you can select which format you want to play such as Video, Music, and Photo…etc, or you can directly press Video/Music/Photo key from the remote controller.
Then, you can freely browse the folders although DMS is not installed.
• Check the power cord connection. Or connect the power cord to another power outlet.
• Are the Component Y/Pb/Pr/ AUDIO L/R cables or HDMI Cable loose or disconnected? Make sure one of connections is correct.
• Try the "SOURCE" button on the remote control of the external display/ TV, to select the correct input source.
Please select Control Panel and then click Appearances and Themes, to
Change the Screen Resolution and adjust the correct screen resolution.
