(1)Find the other AP have the WDS feature.
(2)The SSID with the both AP must be the same.
(3)The wireless channel must be the same.
(4)The subnet for the both AP must be the same but not the same IP address.
(5)Fill the wireless MAC address each other.
(6)The encryption method and the password must be the same.
Note: We recommend use the same brand or the same model modem to established the WDS connection, otherwise the WDS connection maybe not be work
(1)Check your bandwidth with your ADSL line speed. We recommend you can go to the statistic page to check your currently speed type is "ADSL 2+" with the IPTV service.
(2)Check whether you enabled the IGMP proxy and snooping on the correct PVC connection with IPTV service.
(3)If the situation still happened, you can try to use the "port mapping" feature to binding the WAN side IPTV service PVC connection and the LAN port.
ADN-4100Av2 can automatically established the VPN connection , even after the power on, the IPsec setting will be save when you click apply and it will automatically reconnect.
The ADN-4100Av2 support 10 VPN tunnel for IPSec and PPTP, and IPSec max tunnel is 8, the PPTP max tunnel is 2, but if you establish the VPN tunnel fully, the performance shall drop.
Cause the environment is a variable to effect the performance for connection ,you can use this feature to establish the VPN tunnel ,and try to find which tunnel you establish have the best performance.
No, you can't. The ADN-4000v2 equips with two dipped antennas inside the device.
There is a RESET BUTTON on the real panel of the device. To restore factory default settings, keep the device powered on and push a paper clip into the hole. Press down the button over 5 seconds and then release it. After resetting, the username and password will be restored to default settings admin and admin.
The number can be connected is 36 pairs (72 units).It is necessary for PL-551 that the power for all the rooms should be from same phase. Different phase of the PL-551 is not able to connect to each other.