FAQs

By default, the EL-1000 management IP is 192.168.1.101 and management host is 192.168.1.100. If you have multiple EPL-1000 in the same network, you need to change the default management IP for your second, third EPL-1000 firstly.

For example, EPL-1000_A is 192.168.1.101, EPL-1000_B is 192.168.1.102 and EPL-1000_C is 192.168.1.103. So we can use the host 192.168.1.100 to manage these EPL-1000.

Please follow steps below to modify the management IP of EPL-1000_B/C.
1. Connect the EPL-1000_B via console cable.
2. Run the terminal software (Ex. HyperTerminal) with 9600, 8, N, 1 to access the EPL-1000_B by CLI (Command Line Interface).
3. Command: pers [Enter]
4. Command: mgmtip 192 168 1 102 [Enter]
5. Power off and on to reboot the EPL-1000_B.
6. The same procedure for modifying the management IP of EPL-1000_C.

There are two different standards:
1) Homeplug 1.0/1.0 Turbo for 14Mbps & 85Mbps, such as PL-104 and PL-420.
2) Homeplug AV for 200Mbps, 500Mbps, and 1G, such as PL-551.
It should work with the same HomePlug AV device which is another PL-551.
It could co-existence with HomePlug 1.0 or HomePlug 1.0 Turbo such as PL-104 or PL-420 in the same domain, but cannot connect with PL-104 and PL-420.

ADN-4100Av2 can automatically established the VPN connection , even after the power on, the IPsec setting will be save when you click apply and it will automatically reconnect.

(1)Find the other AP have the WDS feature.
(2)The SSID with the both AP must be the same.
(3)The wireless channel must be the same.
(4)The subnet for the both AP must be the same but not the same IP address.
(5)Fill the wireless MAC address each other.
(6)The encryption method and the password must be the same.
Note: We recommend use the same brand or the same model modem to established the WDS connection, otherwise the WDS connection maybe not be work

(1)Check your bandwidth with your ADSL line speed. We recommend you can go to the statistic page to check your currently speed type is "ADSL 2+" with the IPTV service.
(2)Check whether you enabled the IGMP proxy and snooping on the correct PVC connection with IPTV service.
(3)If the situation still happened, you can try to use the "port mapping" feature to binding the WAN side IPTV service PVC connection and the LAN port.

No, VDL-2420MR / VDL-2420MR48 mini-GBIC slot doesn’t support dual speed, it supported Gigabit SFP module only.
Please refer to PLANET MGB series SFP module product information as follow hyper link.
http://www.planet.com.tw/en/product/product_ov.php?id=11027

Yes, the VC-230 and VC-230N have the same HW / SW platform; you can connect VC-230 and VC-230N together for network applications. Just remember to configure one device for CO mode and the other is CPE mode.