Centralized Power Management for Gigabit Ethernet PoE Networking
To facilitate 32W PoE power network applications with Gigabit speed transmission, the GSD-2022P is equipped with 16 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP interfaces with the inner power system. With a total of 185 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
By offering reliable switching technology and advanced networking features, the GSD-2022P optimizes the installation and power management of network devices such as wireless access points, VoIP phones, and security cameras. It also eliminates time and cost of deployment by integrating power and data switching into one unit and freeing network devices from restrictions of power outlet locations and the additional AC wiring.
Perfect Integrated Solution for PoE IP Surveillance
The GSD-2022P brings you an ideally secure surveillance system at a lower total cost. The GSD-2022P provides 16 10/100/1000Mbps 802.3at PoE+ ports able to feed sufficient PoE power to 16 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 16-channel NVR or two 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.
Ethernet Data Transmission Distance Extension
The DIP switch provides “Standard”, “VLAN” and “Extend” operation modes.
With this brand-new feature, the GSD-2022P provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Powered Device Alive Check
The GSD-2022P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden.
Flexible Extension Solution
The two mini-GBIC slots built in the GSD-2022P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSD-2022P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The GSD-2022P provides both 802.3at and 802.3af PoE functions along with 16 10/100/1000BASE-TX ports featuring 30-watt 802.3at or 15.4-watt 802.3af PoE in RJ45 interface, 2 extra Gigabit copper ports and 2 Gigabit SFP uplink interfaces supporting high-speed transmission of surveillance images and videos.
Department / Workgroup PoE Network
Providing 16 PoE in-line power interfaces, the GSD-2022P can easily build a power that can centrally control IP phone system, IP camera system and wireless AP group for the enterprise. Cameras can be installed around the corner in the company or campus for surveillance demands. Without the power-socket limitation, the GSD-2022P makes the installation of cameras easier and more efficient.
Power over Ethernet
|10/100/1000BASE-T Copper Ports||18 auto MDI/MDIX|
|1000BASE-X SFP/mini-GBIC Slots||2|
|DIP Switch||Selectable operation mode
10/100/1000T RJ45 Interfaces
10/100/1000 LNK / ACT (Green)
1000X SFP Interfaces
1000 LNK / ACT (Green)
|Dimensions (W x D x H)||280 x 180 x 44 mm (1U height)|
|Power Requirements||100~240V AC, 50/60Hz, 5A max.|
|Power Consumption/Dissipation||Max. 201 watts/686 BTU|
|ESD Protection||Contact discharge of ±6KV DC,
Air discharge of ±8KV DC
|Installation||Desktop or rack-mount installation|
|MAC Address Table||8K entries|
|Jumbo Frame||9216 bytes|
|Flow Control||IEEE 802.3x pause frame for full duplex; back pressure for half duplex|
|Power over Ethernet|
|PoE Standard||IEEE 802.3at Power over Ethernet Plus/PSE|
|PoE Injector Ports||16|
|PoE Power Supply Type||End-span/Mid-span: 1/2/4/5 (+), 3/6/7/8 (-)|
|PoE Power Output||Per port 54V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE 802.3at)
|PoE Power Budget||185 watts|
|Number of PDs, 7 watts||16|
|Number of PDs, 15.4 watts||12|
|Number of PDs, 30 watts||6|
|Regulatory Compliance||FCC Part 15 Class A, CE|
|Standards Compliance||IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy-Efficient Ethernet
|Operating||Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|Storage||Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
|ICA-3280||H.265 1080p Smart IR Bullet IP Camera|
|ICA-4280||H.265 1080p Smart IR Dome IP Camera|
|ICA-A3280||H.265 1080p Smart IR Bullet IP Camera with Artificial Intelligence|
|ICA-A4280||H.265 1080p Smart IR Dome IP Camera with Artificial Intelligence|
|ICA-M4580P||H.265 5 Mega-pixel Smart IR Dome IP Camera with Remote Focus and Zoom|
|ICA-4460V||H.265 4MP PoE Dome IR IP Camera with Vari-focal Lens|
|ICA-HM620||2 Mega-pixel PoE Plus Speed Dome Internet Camera|
|WBS-502N||5GHz 802.11n 300Mbps Outdoor Wireless CPE|
|WBS-512AC||5GHz 802.11ac 900Mbps Outdoor Wireless CPE|
|WDAP-802AC||1200Mbps Dual Band 802.11ac Outdoor Wireless AP (IP68, 802.3at PoE+, 4 x N-Type connector)|
|WDAP-8350||600Mbps Dual Band 802.11n Outdoor Wireless CPE (IP66, 802.3at PoE, 4 x N-Type connector)|
|VIP-1120PT||High Definition Color PoE IP Phone|
|VIP-2140PT||High Definition Color PoE IP Phone with Dual Display|
|VTS-700P||7-inch SIP Indoor Touch Screen PoE Video Intercom|
|HDP-1160PT||720p SIP Vandalproof Door Phone with PoE|
|HDP-5240PT||720p SIP Multi-unit Video Door Phone with RFID and PoE|
|HDP-5260PT||720p SIP Multi-unit Apartment Vandalproof Door Phone with RFID and PoE|
|VIP-156PE||802.3af PoE SIP Analog Telephone Adapter|
|POE-162S||IEEE 802.3at Gigabit Power over Ethernet Plus Splitter|
|IPOE-162S||Industrial IEEE 802.3at Gigabit High Power over Ethernet Splitter|
|POE-E101||IEEE 802.3af Power over Ethernet Extender|
|POE-E201||IEEE 802.3at Power over Gigabit Ethernet Extender|
|POE-E202||1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender|
|LRP-101C-KIT||1-Port Long Reach PoE over coax Extender Kit (LRP-101CH + LRP-101CE)|
|LRP-101U-KIT||1-Port Long Reach PoE over UTP Extender Kit (LRP-101UH + LRP-101UE)|
|16-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T + 2-Port 1000X SFP Desktop Switch|